Tilting Tilting feeder vibrating feeder

Swing Feeder much as a ball mill set mine belt conveyor feeding equipment. Also called quantitative feeder, feeder evenly.
Swing Feeder Features: Smooth vibration, reliable operation and long life; exciting force can be adjusted, you can change and control flow, convenient adjustment and stability; vibration motor as vibration source, low noise, small power consumption, tuning performance well, no red material phenomenon.
I plant feeder simple structure, reliable operation, easy installation, adjustment, light weight, small size, easy maintenance, the use of closed body structure, can effectively prevent dust pollution.
Swing Feeder technical parameters
Model and specification Outlet size (mm) oscillating frequency (times / min) swing stroke (mm) Feeding size (mm) Capacity (t / h) Outlet size
Width Height Model Power (kw)
300 × 300 250 250 68 0-90 12 2-5 Y90L-4 1.5
400 × 400 350 300 47 0-170 30 3-8 Y100L1-4 2.2
600 × 600 550 400 45 0-220 50 7-12 Y100L2-4 3
750 × 750 600 450 35 50-200 65 10-18 Y112M-4 4
Swing Feeder installation and commissioning, use and maintenance:
1, feeder such as for lysn-bearing  dosing, in order to ensure a uniform and stable feeding, to prevent the material gravity should be installed horizontally, such as for general continuous feeding materials can be down-dip 10 ° installation. For viscous materials and high moisture material can be down-dip 15 ° installation.
2, after the installation of the feeder should be left swimming 20mm gap should be horizontal lateral suspension means the use of flexible connections.
Three empty test before all bolts should be strong again, especially the vibration motor bolts, 3-5 hours of continuous operation, should be re-tightened once.
4, runs in, two vibrating motors must rotate.
5, feeding time during operation should always check the amplitude of the current and noise stability, abnormal should promptly stop treatment.
6, the motor bearings once every two months filling lubricants, high temperature lubricants season should once a month raise.
Swing Feeder adjust the eccentric pin eccentric eccentricity, can change the stroke length of the oscillating plate, to adjust the feed amount of a wide range, adjust the level of the discharge port shutter to change the size of the discharge port, able to make precise adjustments to the feeding amount.