after the fixed bearing horizontal toggle stick

Nine steps to help improve the efficiency of NSK Bearings
NSK Bearings able to play a protective role is most effective maintenance methods, and experimentally demonstrate the following method is NSK Bearings are effective and do not require a lot of manpower or resources to work can be carried out, so today, as we introduce nine steps to help improve the efficiency of NSK bearings, hope to help you in the daily maintenance of the work more easy to use or operate smoothly.

1, when the bearing run to a certain time period (or warranty maintenance support period), all the bearings removed;
2, with clean diesel fuel or kerosene soaked with cleaning bearings, if the technical conditions for the best open closures cleaning;
3, after cleaning the air dry cleaning oil, visual inspection for damage;
4, with a 150mm or so, IKO bearing diameter equal to the diameter of the stick (preferably hollow tube), one end fixed to a bearing;
5 hand fast rotating bearing, while the stick (woodwind) on the other side of the top of the ear or debate on the microphone to listen to the audio amplifier bearing rotation noise;
6, after the fixed lysn-bearing horizontal toggle stick, check the bearing is worn loose;
7, loose serious, turn the noise is too large, there is a serious defect NSK Bearings should be eliminated and replaced with the same model;
8, take a bucket of the amount of grease (high-quality dry butter) with gentle heat to melt (non-thermal), will detect over-bearing into the bucket to soak no bubbles overflow.
Cool before removing the bearing grease, grease residue less. After cooling, remove grease NSK Bearings, residual grease quantity. Needed to determine the amount of residual grease.
9, with a soft cloth or tissue to wipe the outside of the bearing grease will NSK Bearings An original fitted to the pulley, maintenance work is complete