Backing bearings are particularly thick outer ring of the rolling bearing, when used to form a group to be mounted on the shaft of a stationary support rollers. Pressure on the work roll through the intermediate roller and the support roller is passed to the system to the rack through the saddle. Generally used for multi-roll cold rolling mill equipment can also be used for other occasions, such as straightening machine.
2014年6月26日星期四
Cylindrical roller bearing into account the intensity of competition in the industry
Core assumptions (1) Consolidated Company 2014 after taking into account the various types of equity investment and equity investment and non-bearing production line will be gradually put into full production, and the industry boom downturn trend will continue for some time, we have production capacity of the company to raise investment Cylindrical roller bearing projects after the release of the results of the contribution cautiously optimistic. Assuming 2014-2015, the company bearing business will achieve 18% and 15% growth in the spindle business will achieve 5% and 10% growth, bearings and Cylindrical roller bearing steel trading income remained shrinking trend, but the decline narrowed, respectively, to achieve -28% -25% growth.
(2) Taking into account the intensity of competition in the industry, and the company bearing high-speed rail Precision Bearing project and the robot can contribute to the results take time, we assume that products bearing the company's gross profit margin decreased slightly steady, 2014 - 2015 gross profit margin of 24.50%, respectively, and 24.00 %, spindle product gross margin remained at around 5% level; bearings and bearing steel trade continues downward trend, respectively, 1.50% and 1.50%.
(3) We assume that the company can maintain the current level of government subsidies and corporate tax levels.
The main risks (1) the risk of a further decline in downstream demand; risk (2) changes in tax policies; (3) the company raised investment project progress is slower than expected risk.
2013年10月8日星期二
TIMKEN appeared in the " Global 100 Most Ethical Companies list"
TIMKEN Precision bearing distributor in China editor , recently, is committed to promoting best practices in the field of business ethics in international institutions - the U.S. Ethisphere Institute (Ethisphere Institute) announced the 2010 annual " Global 100 Most Ethical Companies list ." With its long-standing TIMKEN uphold morality and integrity first basic values, and a focus on quality, innovation and core values of independence , appeared in the " Global 100 Most Ethical Companies list ."
U.S. Ethisphere Executive Director Alex Brigham Association TIMKEN selected in the " Global 100 Most Ethical Companies list," said : "t Timken sound business ethics to promote the contribution of the environment for all to see in the industry , which fully demonstrated the timken for a clear understanding of business ethics , namely: business practices adhere to the highest standards not only related to the company 's reputation , but also, and business performance and profitability are closely related . "
TIMKEN backing bearings , President and CEO Ward ( Tim ) ? Mr. Timken in this IMKEN appeared in the " Global 100 Most Ethical Companies list ," talked about " our unswerving commitment to fulfill our moral , thereby continuously gained business success. this chain of causation runs through Timken's historical development , I also believe that it is every foothold in this great enterprise . Similarly the honor due to iron Timken every employee they uphold the company 's ethics and integrity first conviction , for our customers , shareholders and the community to provide services , so as to win the trust of the company . "American moral Village Association approved code of ethics , litigation and irregularities past record ; assessment of enterprises in the innovation and investment in sustainable business practices ; consider corporate social responsibility efforts ; and senior management by reference to corporate persons , the industry peers , suppliers and customers nominated situation. In-depth research and comprehensive analysis of the association for more than 100 countries from around the world , thousands of companies in 36 industries conducted evaluation , and ultimately determine finalists . TIMKEN also selected with the " Global 100 Most Ethical Companies list" of well-known companies, including : American Family Insurance , American Express , Ford , General Electric, Google , Nike, Starbucks and Fuji Xerox
2013年9月16日星期一
called correlation dimension is an integral assembly dimension chain ring.
About Precision bearing Assembly Dimension Chain Definition
Closed loop assembly dimension chain is often imported bearing assembly precision or technical requirements. Because this requirement is met through the parts, components assembled before the final form and guaranteed, size, or position is a result of the relationship.
From the design point of view, is the lead assembly precision bearings and forming the basis for assembly dimension chain, which also determines the design and manufacture of precision parts basis. Identify with the precision of parts and the corresponding relevant dimensions, and draw the corresponding dimension chain diagram. And the accuracy of the relevant parts related parts called, the corresponding relevant dimensions, called correlation dimension is an integral assembly dimension chain ring.
The establishment of assembly dimension chain is the first step in solving the problem assembly accuracy, only when creating assembly dimension chain is correct, it makes sense to solve dimensional chain. Therefore, in the assembly dimension chain, this step is very important.Thrust bearing is installed correctly, the seat can automatically adapt to the rolling elements rolling, make sure to scroll down raceway body is located. If installed backwards, not only Backing bearings is not working properly, and each mating surface would be subjected to severe wear. As shaft ring and seat ring and the difference is not very obvious, the assembly should be careful not to mistake. In addition, the thrust bearing race with the bearing hole should be left between 0.2-0.5mm gap to compensate for parts processing, the error caused by mounting inaccuracy, when in operation bearing ring center offset, this gap would ensure its automatic adjustment, avoid touching the friction to operate normally. Otherwise, it will cause severe damage to the bearing.
position is a result of the relationship.
About Bearing Assembly Dimension Chain Definition
Closed loop assembly dimension chain is often imported Precision bearing assembly precision or technical requirements. Because this requirement is met through the parts, components assembled before the final form and guaranteed, size, or position is a result of the relationship.
From the design point of view, is the lead assembly precision Slewing bearing and forming the basis for assembly dimension chain, which also determines the design and manufacture of precision parts basis. Identify with the precision of parts and the corresponding relevant dimensions, and draw the corresponding dimension chain diagram. And the accuracy of the relevant parts related parts called, the corresponding relevant dimensions, called correlation dimension is an integral assembly dimension chain ring.
The establishment of assembly dimension chain is the first step in solving the problem assembly accuracy, only when creating assembly dimension chain is correct, it makes sense to solve dimensional chain. Therefore, in the assembly dimension chain, this step is very important.Thrust bearing is installed correctly, the seat can automatically adapt to the rolling elements rolling, make sure to scroll down raceway body is located. If installed backwards, not only bearing is not working properly, and each mating surface would be subjected to severe wear. As shaft ring and seat ring and the difference is not very obvious, the assembly should be careful not to mistake. In addition, the thrust bearing race with the bearing hole should be left between 0.2-0.5mm gap to compensate for parts processing, the error caused by mounting inaccuracy, when in operation bearing ring center offset, this gap would ensure its automatic adjustment, avoid touching the friction to operate normally. Otherwise, it will cause severe damage to the bearing.
2013年9月15日星期日
product development and application of linear and other fields to work closely .
FAG bearings sales center Beijing, January 7, 2012, the internationally renowned wind power equipment manufacturer Goldwind in Beijing at the third supplier conference, Goldwind to the worldwide production of rolling bearings and linear motion products leader - Schaeffler Group (FAG, INA, LUK) award 2011 "Excellent Supplier Award", the Schaeffler Group (FAG, INA, LUK) is the only "Excellent Supplier Award" bearing manufacturing enterprises.
Beijing FAG Precision bearing sales center live coverage, the Schaeffler Group (FAG, INA, LUK) Division in the wind energy industry has more than 30 years of experience, research and development and production of wind turbines for the full range of backing bearings products. Schaeffler Group's INA and FAG brands of about 60 industrial sectors provide more than 40,000 kinds of standard products ranging widely. Schaeffler Group (FAG, INA, LUK) cooperation with Goldwind has been limited to the bearing, the two sides have been in condition monitoring, simulation operations, after-market development and services, product development and application of linear and other fields to work closely .
Schaeffler first wind power Roller bearing areas in China to establish a professional product sales and technical service team, with almost all the major domestic manufacturers of wind turbine manufacturers and supporting the establishment of a strong partnership. Goldwind to Schaeffler awarded 2011 annual "Supplier Excellence Award", FAG bearings distributor in China side believes that this award is the Schaeffler Group leader in the field of wind power in China bearing supplier status once again recognized and affirmed.
Beijing FAG bearings sales center, FAG Bearing stock, direct the country in various industrial cities and regions, you are welcome to call us
2013年9月10日星期二
SKF technology to make the automotive industry more environmentally friendly
SKF Precision bearing distributor in China from the Swedish SKF Group's global video conference was due to the SKF Group continued commitment to the sustainable development strategy, SKF Group has extensive innovation in environmental technology, especially the technology used in the automotive industry, the automobile industry more environmentally friendly and better sustainable development.
SKF company in the automotive industry's innovative products and services aimed at environmental protection and reducing carbon dioxide emissions. Now, SKF has developed a new generation of SKF SPEEDI-SLEEVE, the program in a sealed system performance has clutch bearing further improved, is a fully proven shaft wear problems can be overcome automotive solutions.
For a specialized bearing manufacturer, SKF company, grease lubrication is also crucial. SKF's knowledge of these on the one hand to develop new products and services, greatly promote the sustainable development of the automotive industry and energy, while extending the service life.
SKF Green Innovation Project supports the automotive industry, the automotive industry is to better environmental protection. This is all thanks to the SKF Group sustainable development strategy. Sustainability SKF also offers new opportunities, such as product innovation and development of new business areas, thereby enhancing SKF's reputation as an industry leader. Most importantly, sustainable development so that we can further enhance the relationship with stakeholders and their trust, in order to achieve the company's mission to become the first choice.
2013年9月8日星期日
FAG BAX series bearing spindle speed increase
FAG Precision bearing distributor in China sales center editing, in order to enhance the productivity of machine tools, machine tool spindle must rotate at high speed German FAG Bearing Group to develop new BAX spindle bearings, the main features to improve the spindle speed, thus increasing the efficiency of the machine. We follow FAG distributor in China, to improve understanding of FAG spindle speed BAX-thrust bearing (as shown below).
FAG BAX series is a high rigidity spindle bearings thrust bearings, eliminating the need to withstand the overturning moment, the dynamic characteristics of the composite load does not weaken, thus FAG BAX series spindle tapered bearing and spindle speed can improve strong support. When BAX series with a high-speed spindle bearings FAG cylindrical roller bearings are used together, can withstand high speed spindle radial load, but also to withstand high-speed spindle axial load.
FAG BAX series bearings to improve machine tool spindle speed so that users benefit from three points: first, due to increased spindle speed, thus increasing the productivity of machine tools; Second, because the load is high, cutting excellence; Third, high rigidity, can achieve excellent processing accuracy.
FAG BAX series bearings increase the diameter of the spindle speed and aperture in the 50-200 mm size series bearing 70 matches, BAX bearings in size with two-way thrust angular contact ball bearings compatible, but can also provide hybrid bearings.
2013年9月3日星期二
Summary of basic knowledge of automotive bearings
Auto Precision bearing installation, use and maintenance of common sense : FANUCCNC systems and tools to connect and adjust wire cutting in the selection of the drive wire range of applications and market analysis procedures D80 constant volume blower forging technology SINUMERIK810D / 840D condensed commissioning Manual - alarm PowerMILL7.0 new functions and features threaded parts 9 CNC lathe programming source NC machining tool compensation Botek system is suitable for deep hole machining tool parts CNC milling CNC type which is suitable for this part milling plus KV800 inverter knitting machine for the processing plant on the application brings powerful advantages machine 5 axis machine tool industry commonly bilingual history of the development project VSR solder joint fatigue life prediction horizontal Lathe modular and programmable controller applications motor shaft bearing currents caused by burning and preventive measures 240 vibration machine manufacturing Information Practice progress World maintenance knowledge to use to install a car bearing assembly tool is demolished car an important distinction ordinary mechanical bearings automotive bearings mobile environment using force status working conditions more complex automotive catch into a very precision machine parts installed correctly using lubrication and maintenance is essential to achieve the basic functions of catch into a clean kerosene petrol bearing mounting and dismounting bearings with matching check related parts cleaned ready for use .
Car with ordinary mechanical bearing an important difference is that in the mobile automotive bearings used in an environment , so its force status and working conditions more complex, while catching a car as a very precise mechanical parts , the correct installation and use , lubrication and maintenance for the realization of the basic functions essential to catch .
Bearing installation and removal
With clean kerosene or gasoline will tapered bearing and related parts mated to clean ;
Check the bearing is ready to use consistent with the original model , with matching part size is qualified ;
With a special assembly tool pressed into the bearing sleeve , tool sleeve diameter must not exceed the outside diameter of the bearing wall , mounting force should be uniform , not shock and barbaric assembly ;
Bearings should be rotated after installation of bearings and related components to see if there catching phenomenon and abnormal noise ;
By host components required to fill the specified grease or oil ;
In the assembly of large bearings and bearing and shaft bore large amount of interference between the products must be the bearing oil bath heating, oil temperature at 80 degrees Celsius ; bearing removal , you must use special tools drawing class
Bearing damage Basics
Most of the imported bearing damage for many reasons, such as beyond the original estimate of the load, non-effective sealing, tight fit caused by too small bearing clearance and so on. Any one of these factors are factors that damage type has its unique and special damage will leave traces. Therefore, to view damaged shaft Precision bearing, in most cases you can find its probable causes.
Generally, a third of the bearing damage due to fatigue damage, arising out of the other one-third of poor lubrication, the other one-third of contaminants into the bearing arising out of improper handling or installation. However, these types of damage are not related with the industry. For example, half of the pulp and paper industry is due mostly to poor lubrication or bearing damage caused by pollution and not due to material fatigue caused byLubrication of bearings, in particular, the fatigue life of the rolling bearing and friction, wear, temperature, vibration, etc. have a major impact. Without proper lubrication, the bearings will not work. Bearing causes of damage showed that more than 40% of the backing bearings damage are related with poor lubrication. So, good lubrication for bearings is to reduce bearing friction and wear of effective measures.
Meanwhile, imports bearing lubrication and cooling, rust, sealing, ease the impact and other effects.
Bearing lubrication effects can be briefly described as follows
1, in the rolling surface contact with each other or the two form a film between the sliding surfaces of the second surface spaced from the contact surface to reduce friction and wear.
2, using oil lubrication, especially the use of circulating oil lubrication, oil mist lubrication and injection lubrication, the lubricant inside the bearing can take away most of frictional heat, serve as an effective heat sink.
3, using grease lubrication, be protected from external dust and other foreign matter from entering the bearing, and sealing effect.
4, the lubricant has a role to prevent metal corrosion.
2013年9月2日星期一
Bearing the importance and role of lubrication
Lubrication of Roller bearing in particular, the fatigue life of the rolling bearing and friction, wear, temperature, vibration, etc. have a major impact. Without proper lubrication, the bearings will not work. Bearing causes of damage showed that more than 40% of the bearing damage are related with poor lubrication. So, good lubrication for bearings is to reduce bearing friction and wear of effective measures.
Meanwhile, imports Precision bearing lubrication and cooling, rust, sealing, ease the impact and other effects.
Bearing lubrication effects can be briefly described as follows
1, in the rolling surface contact with each other or the two form a film between the sliding surfaces of the second surface spaced from the contact surface to reduce friction and wear.
2, using oil lubrication, especially the use of circulating oil lubrication, oil mist lubrication and injection lubrication, the lubricant inside the bearing can take away most of frictional heat, serve as an effective heat sink.
3, using grease lubrication, be protected from external dust and other foreign matter from entering the bearing, and sealing effect.
4, the lubricant has a role to prevent metal corrosion.
inner end face and the shaft shoulder pressed, does not allow a gap.
Precision bearing installation must be on the circumference of the ring face exert equal pressure, push the ferrule may not be a direct hit with a hammer prime tool bearing face, so as not to damage the bearings. In the case of a small amount of interference, it can be pressed at room temperature with sleeve bearing ring face, beating with a hammer sleeve, the sleeve will be pressed into the ring balanced. If large quantities of installation, can be used hydraulic press. Press-fitting, should ensure that outer end face and the housing shoulder, inner end face and the shaft shoulder pressed, does not allow a gap.
Single row tapered roller tapered bearing installed last clearance adjustment should be carried out. Clearance values should be based on the use of different conditions and the amount of interference with the size of specifically identified. Necessary, should be tested to determine. Double row tapered roller bearings and water pump bearing has been adjusted at the factory clearance, installation without further adjustment.
Bearing rotation test should be carried out after installation, first hand rotating shaft or bearing housing, without exception, then in power for no-load, low speed, then gradually increase as the functioning of the rotation speed and load, and to detect noise, vibration and temperature , abnormal, should stop and check. Normal operation test before delivery
2013年8月28日星期三
Timken Bearing Company president to visit China in Hunan
We Hunan TIMKEN Precision bearing distributor over there got the news, said: Just recently, TIMKEN Hunan Electric (Hunan) Bearings Co., Ltd and Xiangtan City Qingyuan Environmental Technology Co. emulsified wastewater treatment project contract signing. September 8, the United States TIMKEN bearings, President and CEO James Griffith came to China in Changsha, Hunan Province Vice Governor Han Yongwen and get an audience. Visible Timken optimistic about the Chinese market and support.
In their conversation, the United States TIMKEN bearings, President and CEO James Griffith said it would actively participate in the economic and social development in Hunan, but also that its TIMKEN brand in the Chinese market recognition. Vice Governor of Hunan Han Yongwen first welcomed the arrival of the guests, but also that Hunan will Timken Company in Hunan development to create a good environment, I hope to give full play Timken technology, capital, talent, and further increase in Hunan's investment, to achieve mutually beneficial and win-win.
The Timken Company is the world's third largest manufacturer of bearings. In 2008, the company together with Xiangtan Electric Co., Ltd. joint venture incorporated in Xiangtan Iron Mu Kenxiang electricity (Hunan Timken bearings) Bearing Co., Ltd., focuses on Chinese wind power market MW direct drive wind turbine large iron Timken bearing production and sales.
TIMKEN company since 2008 for EAF dust recycling
1 United States TIMKEN company's first pair of Timken worldwide staff of Business Ethics Policy training and certification; in the business, regional and corporate compliance committee under the leadership of, TIMKEN companies take the initiative to identify and reduce the risk of the occurrence of the enterprise core values into practice;
2 U.S. Timken Company support local investment projects, including the construction of water recycling in Precision bearing India and wastewater treatment systems to help the region's farmland irrigation; through donations of land and financial support to help build the U.S. state of South Carolina Utah Niang County (Union County ) community sports venues;
3 United States TIMKEN company eventually leading companies to fulfill environmental commitments, including: TIMKEN company since 2008 for EAF dust recycling, reducing 31,000 tons of landfill; TIMKEN Company recycled packaging innovations annual reduction the six million pounds of waste generated; TIMKEN company recycling nearly 300 tons of metal scrap to produce new steel products. Timken makes steel products, raw materials from almost 100% recycled materials;
2013年8月20日星期二
'How to calculate the weight of doing business Method'
Kunshan Precision bearing In international trade, a lot of goods are measured by weight, based on normal business practices, usually calculated weight method are the following:
1. GW:
GW is a commodity body weight plus the weight of the packaging, this approach generally applicable to the weight low value goods.
2. NW:
Weight refers to the weight of the product itself, as the packaging of goods after the actual weight. Net weight is the most common in international trade weight approach. However, some lower-value agricultural products or other goods, sometimes with "gross for net" approach to weight. For example, broad beans 100 tons, single jute bags gross for net, called "gross for net" was actually calculated according to gross weight.
Net weight when in use, for how to calculate packaging weight, the international community are the following practices:
(1) according to the actual tare weight calculation, the actual tare weight referring to the actual package, it refers to the measure of the packaging by piece obtained after combined.
(2) calculated according to the average tare, if the goods are used relatively uniform packaging, weight or less, can be drawn from the entire consignment certain number of pieces, called out of its tare weight, and then calculated the average weight, and then multiplied by the total number, can be obtained tare entire cargo, in recent years, with the development of technology and standardization of packaging materials and specifications, with the average tare practice has become increasingly common, some people call it standard tare.
(3) the customary tare weight calculations, some commodities, because they use packaging materials and specifications have been relatively stereotyped, tare weight has been recognized by the market. Therefore, in calculating its tare weight, you need to weigh the package piece by piece, recognized by customary leather pieces can be obtained by multiplying the total.
(4) according to the agreed tare calculation, that the prior agreement of both parties as a basis for calculation package weight.
Internationally there are a variety of computing tare method, which of these calculations to obtain the net weight, should be based on the nature of goods, the use of packaging characteristics, the number of contracts and the trading habits of many, agreed in advance by both parties tied contract to avoid controversy afterwards.
2013年8月16日星期五
Bearing damage exclusion maintenance
By bearing failure and deterioration, performance status parameters to determine and predict the reliability and performance of the bearing, the site of the abnormal situation, causes and degree of risk identification and judgment to decide restoration and improvement of the integrated technology. Therefore, the bearing fault diagnosis technology is not a simple fault detection (or monitoring) technology, nor is it a simple point inspection instrumentation. Correctly, quickly and effectively signal acquisition, data processing, manual or automatic identification and judgment. In order to determine the scientific repair cycle, the mechanism should be based on various types of failure, fatigue, wear life tests and estimates necessary.
Precision bearing fatigue failure is a failure surface forms, mainly for fatigue crack initiation, propagation and fracture processes in alternating load faults arising under long-term effects of the metal. Cracks in two ways:
1, on the surface, which is the process of rolling contact bearings, because the work surface plastic deformation and strain hardening of the surface of the contact stress caused by cyclical changes in the role of external loads, and finally in the development of small cracks from the inside surface, in between the formation of surface cracks, wedged into the surface as a result of lubricant power open to crack down on the wall, forcing the forward crack;
2, from the surface layer, again under the pressure of the contact surface, the first surface of the exposed areas of cracks cracks certain depth and angle of the direction along the surface to a certain depth from the surface of the contact surface, and beyond surface, and eventually the formation erosion stripped, leaving a Makeng.
From the bearing surface, or from the surface layer cracks, these two objectives (parts carburizing, quenching, and other surface treatment, the latter if there are uneven hardness, organization, and non-uniform stress and other negative, the contact stress generally from the opposite underground cracks under the influence, if the part surface quality is poor, there is a defect (oxidation and decarbonization), friction or poor lubrication, the surface cracks. raceway sound control methods are: selection of low-noise bearings that waviness small bearings, judicious selection of the conditions of use. raceway sound often affect the entire mechanical noise reduction raceway sound can reduce the overall mechanical noise.
Directed to bear the load of the ring can be used looser fit.
Load character selection with load should first consider the case of rotation vector relative to the ferrule. In accordance with the synthetic radial load vector relative to the rotating ring case, the load on the ferrule can be divided into: a fixed load, rotational load and swing load, shown in Figure 2-2.
a. fixed load is applied to the synthesis of radial load on the ring by ring raceway of the local area is exposed, and transmitted to the shaft or bearing the appropriate local area, this load is called a fixed load. Its characteristics are synthetic radial load vector with ferrule relatively static. Directed to bear the load of the ring can be used looser fit.
b. rotational load acting on the radial load on the composite ring raceway along the circumferential direction of rotation, sequentially from the various parts of the exposure, this load is called rotational load, which is characterized by the synthesis vector with respect to the radial load rotating ferrule . Withstand the rotational load of the ring tight fit to be elected, in exceptional circumstances, such as the load is very light, or under heavy load low speed only occasionally rings, bearings use hard materials and surface roughness is higher, rotating load to bear Rings can also be used looser fit.
c. swing load acting on the ring a synthetic variable radial load direction, this load is called Precision bearing load or non-directional load, which is characterized by the synthesis of the role of the ferrule of the ferrule radial load vectors must raceways swing area for a certain region is exposed raceway, or acting on skf bearings the load is on the impact load, vibration loads, the direction, the load values change frequently. Have to bear the load bearing swing, jackets circle and weeks, bearing, the hole should be adopted with a tight fit.
2.3 load size between the ring and the shaft or housing over the load depends on the size of the win, the heavier the load using a larger amount over win, the lighter the load using a smaller amount over win. Usually equivalent radial load p into "light", "normal", "heavy" load three cases, the dynamic load rating of the bearing off series of c in Table 2-1, alternative shaft and housing bore tolerance zone reference.
2.4 shaft and housing bore tolerance band selected according to the size and nature of the load, on the axis and with a defined tolerance Commission controllable in Table 2-2 - Table 2-4 inside.
2.5 mating surface roughness and tolerance with surface roughness and tolerance, direct impact on product performance, such as wear resistance, corrosion resistance and with nature. Therefore, a reasonable requirement shaft and housing bore with geometric tolerance and surface roughness raised demands for a stable complex nature and improve fit over the connection strength is essential to win.
2013年8月14日星期三
Tapered roller bearing structure, performance characteristics:
Tapered roller bearing type code 30000, tapered roller bearings are separable bearings. Under normal circumstances, especially in GB/T307.1-94 "Rolling bearings tolerance" are involved in a range of sizes within the tapered roller bearing outer ring and inner components can be interchanged between one hundred percent use. The angle of the outer ring and the outer raceway diameter size has been standardized with the same size and shape provides. Not allowed to change in design and manufacturing. To cause the tapered roller bearing outer ring and inner components available in the world between interchangeable.
Tapered roller bearings are mainly used to bear radial load mainly radial and axial joint load. And angular contact ball bearings, bearing capacity, low speed limits. Tapered roller Precision bearing can withstand axial load in one direction, the shaft or housing to limit axial displacement in one directionorthern High Temperature Bearing Manufacturing Group has always put the development of scientific and technological innovation as the driving force. According to Kelvin Tong introduction, the company in 2013 continue to increase investment in science and technology this year, has completed an investment of 5 million yuan to build research and manufacture of building 1000 square meters, an increase of advanced production equipment 8 (sets), advanced testing equipment sets (sets) , the introduction of professionals 6, further strengthening scientific and technical personnel
2013年8月12日星期一
PRS introduce you to IKO Crossed Roller Bearings
Crossed roller bearings online delivery center is specialized in large, extra large bearings and steel runway bearings, slewing bearings, precision crossed roller bearings, precision crossed tapered roller bearings, Thin section crossed roller bearings, cross roller bearings thin section ball bearing production and R & D of high-tech enterprises.
Here is your brief IKO Crossed roller bearings.
Inner and outer rings are integrated structure (non-split), with the mounting holes on the inner and outer rings can be easily installed on the device. In addition, less susceptible to such a shaft hole and the surrounding structure of the plate, to achieve a high rigidity, high precision guide. Crossed roller Precision bearing are orthogonal collocation between the inner and outer roller, is a compact structural bearings. Rolling surface for the line contact, thus bearing load caused by the elastic displacement is extremely small, and can also carry radial load, axial load and moment other complex loads.
This section requires small bearings are widely used in high rigidity and high rotational accuracy of industrial robots, machine tools and medical equipment such as rotating parts.
Crossed roller bearings with cages and supplied splitter and full roller way.
With a holder and with the separator for high speed friction coefficient of the site, full roller suitable for low-speed heavy-duty area.
Our company since its inception in 2003, has been dedicated to providing global customers quality, affordable high price products. After years of development and progress, Precede in 2005 passed the ISO2000 quality system certification, and now owns a complete set of production equipment and testing instruments, can provide global users with less than 4000mm diameter in a variety of products and quality services .
2013年8月11日星期日
Xiangyang bearing securities affairs department official representation.
Adjusted non-public offering of shares pricing benchmark for the company meeting of the fifth Board announcement date (13 July 2012), 20 trading days before the pricing benchmark average trading price per share ninety of 3.80 yuan / share, however, Xiangyang Precision bearing non-public offering of shares of the adjusted issue price of not less than 4.27 yuan per share.
Company in accordance with the number of twenty trading days before the pricing benchmark stock trading price of ninety percent price difference Xiangyang bearing on the issue price 4.27 yuan, 0.47 yuan higher than 3.80 yuan.
"The key is to be increased smoothly, pre-meeting, it may be because the initial plans for the proposed issue price 5.72 yuan, some small shareholders to sell the stock, now quilt so they oppose." Xiangyang bearing securities affairs department official representation.
It is worth mentioning that, although the increase compared to the initial plan set, Xiangyang bearing the times on the issue price is reduced, however, the company was not willing to reduce the total funds raised, the final choice of approach is to greatly increase the number issued.
Public information, Xiangyang bearing the adjusted set by the plan, issue number increased to 16,000 million shares, corresponding to 4.27 yuan on the issue price, still intends to raise funds up to 683 million yuan.With the increase in the number issued, the actual control of Xiangyang bearing tricyclic group will be 4.27 yuan per share, the purchase of the non-public offering of 80% of the total number of shares, ie 128 million shares, which means that tricyclic group had to pull out 547 million yuan real money.
tricyclic Xiang-axis industrial park a construction project."
Xiangyang Taper bearing contrarian expansion actual controller dig 547 million from pay
21st Century Network December 18, Xiangyang bearing (3.81,0.01,0.26%) (000678.SZ) announced the acquisition of the report, the company's actual controller tricyclic Group (hereinafter referred to as tricyclic group) to be adopted by recognized
21st Century Network December 18, Xiangyang bearing (3.81,0.01,0.26%) (000678.SZ) announced the acquisition of the report, the company's actual controller tricyclic Group (hereinafter referred to as "ring group") to be adopted by subscription Xiangyang bearing be increased to 80% of the shares, booster Xiangyang bearing investment, "tricyclic Xiang-axis industrial park a construction project."
However, this acquisition in the automotive industry into a backdrop of winter, but not optimistic about the industry, and the actual control of listed companies contrarian expansion generous "blood transfusion", has also been market participants believe that the local government under the impulse GDP irrational choice.In fact, for many years already Xiangyang bearing insipid performance weakness filling. In the first two quarters of this year, after consecutive losses in the third quarter, although profitability, but not its operating conditions improved, but because of the sum from the government subsidy of up to 12,919,800 yuan.
Institute of Petroleum Machinery Bearings Bearing Factory is a former Northwest Precision bearing Institute came into being after several reform and restructuring. The Institute holds the petroleum machinery bearing core design and manufacturing technology, the combination of scientific and technical personnel Northwest bearing workers and leaders of several generations of hard work sweat and wisdom. Relying on the Institute, Northwest bearing stock company produces various types of petroleum product life performance precision mechanical bearing the same period reached the international level of similar products in the domestic petroleum machinery manufacturing enterprises industry reputation, becoming the first brand of domestic petroleum machinery bearings. Products cover all areas of domestic petroleum machinery and equipment, and exported around the world. The company developed the production of petroleum machinery bearing in its heyday China's bearing industry has accounted for similar products in the domestic market share of more than 80% export market share above 90%. To improve the core competitiveness of enterprises, survival and development of enterprises play a vital role in
订阅:
博文 (Atom)