How wheel slim section ball bearing repair and maintenance

Automotive wheel slim section ball bearing is important to walk parts. Wheel bearings reduce friction chassis bears during the operation, the task of maintaining normal driving the car. If a wheel bearing failure, may cause the phenomenon of noise, bearing fever, especially the front wheel is more obvious, easily lead to runaway direction dangerous phenomenon. Therefore, slim section ball bearing the wheel bearings must be maintained on schedule. Check wheel bearings (1) Check the tightness of wheel bearings, first inspected the car at one end of the wheel hub axle set up, with the support car stool, wood and other appliances to cover the car a good car safely stand. (2) Rotate the wheel a few laps examined to see whether the smooth rotation, if there is no abnormal noise. If the rotation is not smooth and there is friction sound, indicating that the brake part is not normal; if there is no noise, when the rotation is not smooth and tight loose, indicating that the Cylindrical roller bearing  part is not normal. When the above irregularities should dismantling the hub. For a small car, check wheel bearings, with both hands up and down the side of the tire, the tire pulled his hands back and forth, repeat several times. If normal, then there should be no Songkuang and arrest feeling; If there are obvious swing feel, should be overhauled wheels. (3) Check the braking areas. Usually when checking wheel slim section ball bearing, with wheel brake inspection, if there are traces of oil inside of the tire, probably the brake cylinder or brake lines caused by the oil spill, it is timely to identify the reasons, be excluded.